PVCu pipe and fittings – Subsurface sewers and land drainage
Standard BNQ 3624-135 Unplasticized Poly(Vinyl Chloride) [PVC-U] Pipe and Fittings - Pipes of 200 mm in Diameter or Larger for Sewage and Soil Drainage
This standard sets out the properties and testing methods for unplasticized polyvinyl chloride (PVCu) pipe with smooth interior walls, perforated or non-perforated, of a diameter from 200 mm to 1200 mm. More specifically, it applies to perforated or non perforated pipe that can be used for sewers or land drainage or to transport liquids by gravity flow.
The pipes are divided into two types:
Type 1, which includes pipe with a smooth interior and exterior wall and which is subdivided into two classes based on the SDR 26 and SDR 35 dimension ratio.
Type 2, which includes ribbed pipe with a smooth interior wall, that is, pipe with solid or hollow ribs.
The standard also applies to fittings fabricated from pipe ends and molded polyvinyl chloride fittings of a diameter of 200 mm to 450 mm.
Download standard
8451
ANG
BNQ 3624-135
Unplasticized Poly(Vinyl Chloride) [PVC-U] Pipe and Fittings - Pipes of 200 mm in Diameter or Larger for Sewage and Soil Drainage
This new edition supersedes the edition dated March 14, 2000.
Tuyaux et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) - Tuyaux d'un diamètre supérieur ou égal à 200 mm pour les égouts et le drainage des sols
Cette nouvelle édition remplace celle du 14 mars 2000.
MDDELCC - Direction générale des politiques de l'eau - Direction des eaux municipales
Mr. Stéphane Bergeron
Association des ingénieurs municipaux du Québec (AIMQ)
Mr. Jean-Yves Caron
Les plastiques Abénaki inc.
Mr. Alain Caza
Béton Brunet
Mr. Claude Couillard
Ville de Québec
Mr. Jean Gingras
Corporation des officiers municipaux et en environnement du Québec (COMBEQ)
Mr. Daniel Grenier
Centre de recherche industrielle du Québec (CRIQ)
Mr. Alain Leroux
IPEX Gestion
Mr. Marc-Antoine Loranger
Ministère des Transports, de la Mobilité durable et de l'Électrification des transports (MTMDET)
Ms. Rowena Patenaude
Royal produits de bâtiment
Mr. Jacques Pharand
Ville de Montréal
Mr. Christian Vézina
NORDIKeau
Certification Offer
Manufacturers may ask the BNQ to recognize the conformance of their pipes and fittings with BNQ 3624-135. To obtain certification of their products, the manufacturers must prove they comply with the standard’s requirements.
General requirements:
Requirements related to thermoplastic (PVC)
General characteristics of the pipes and fittings
Assembly
Special requirements:
Dimensional characteristics, including the location and dimensions of the perforations
Mechanical characteristics (rigidity, crush and shock resistance, tightness of joints and quality of fusion bonding of co-extruded multiple smooth wall pipes)
Chemical resistance
Solar radiation protection
Verification of the PVC extrusion quality of the pipes
Verification of the moulding quality of PVC fittings
Marking and handling
This certification program is accredited by the Standards Council of Canada.
Hicham Madyani, P. Eng. Program Leader Bureau de normalisation du Québec Tel.: 418-652-2238 / 1-800-386-5114, ext. 2320
This email address is being protected from spambots. You need JavaScript enabled to view it.
